 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
   |
|
||||||||||||
 |
|
|||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
Click here to view installation instructions for Matte Vinyls, Etched Glass, Brushed Chrome, and 22 K gold. Click here to view installation instructions for DeNovo.
For Matte Vinyls, Etched Glass, Brushed Chrome, and 22 K gold: First things first...clean surface area with a lint free cloth! |
|
|---|---|
 |
 |
Position your graphic with masking
tape on both outside edges as shown. |
Once your graphic is in place, apply
a horizontal masking tape “hinge” along the entire top edge of the graphic. |
 |
 |
Remove the tape from outside edges,
lift the graphic from the bottom and gently remove the backing paper. |
Keeping the transfer tape tight, lower
the graphic and firmly begin to squeegee from the top down |
 |
 |
Very gently peel the transfer paper
away from the graphic. |
In the event that you experience air bubbles, use a straight pin to puncture and then rub out with clean fingers. |
|
Graphic Removal... Using a hairdryer, heat the graphic in a consistent manner until the graphic feels warm to the touch, gently peel a corner of the graphic away from the wall. Reheat as necessary to remove entire graphic. *While Ozwalled graphics are safe for most walls and use a low tack adhesive, we cannot guarantee how all walls will respond to the removal process. |
|
|
For DeNovo: First things first...clean surface area with a lint free cloth! DENOVO WALL GRAPHICS ARE REMOVABLE AND REUSABLE |
|
 |
 |
Unlike our other graphic materials,
DeNovo graphics do not have a paper mask on top. |
Gently peel the graphic from the
backing paper. |
 |
 |
Holding the graphic at top and
bottom... |
...begin to stick to your wall surface.
|
 |
 |
Use the squeegee provided to
help smooth grahic onto the wall. |
You can remove and reuse DeNovo graphics multiple times. |
©2007 Ozwalled.com / Privacy Policy
Site Design:
